AIR/HYDRAULIC POWER ROTARY POWER CHUCK
Click on product image magnification
Online inquiryBrand：NTH
Self-Contained Power Chuck. No need for an extra rotary actuator.
Easy mounting, collet and jaws can be changed rapidly to set the gripping system.
Aluminum alloy chuck body, light-weighted, good heat dispensation.Widely applied to convert manual lathes into powered ones. Refer to the following figure.
Don't spray the cutting fluid to the collet directly.
JA7-44/JH7-44 type collet adopts the 2 times force design and the workpieces can be gripped by extanding.
Introduction
It used to be complex for users to convert a manual lathe into one with power workholding device since setting up a hydraulic system is quite troublesome.
NTH Rotary Power Chuck is specially designed to help users to set up a power chuck in a low cost and easy way. With its built-in rotary actuator, the Rotary Power Chuck can be installed and start working in less than 20 minutes.
Rotary Power Chuck comes with both air chuck and hydraulic chuck models that range from small sizes to large ones, giving users more options to choose from. Rotary Power Chuck now is widely applied to convert manual lathes to semi-auto ones with power workholding system, or is applied to build special purpose machines.
Collet Style Power Chuck with inter extand and outside gripping(JA7-44,JH7-44)
Jaw Style Power Chuck-Air(JA5-25,JA7-40,JA7-70)
| Model | JA7-44 | JH7-44 | JA5-25 | JA7-40 | JA7-70 |
|---|---|---|---|---|---|
| A | 192（7.56〞） | 192（7.56〞） | 135（5.31〞） | 192（7.56〞） | 192（7.56〞） |
| B | 155（6.10〞） | 155（6.10〞） | 100（3.94〞） | 155（6.10〞） | 155（6.10〞） |
| C | 44（1.73〞） | 44（1.73〞） | 25（0.98〞） | 45（1.77〞） | 68（2.67〞） |
| D | 5（0.20〞） | 5（0.20〞） | 4.0（0.16〞） | 4.5（0.18〞） | 5.0（0.20〞） |
| E | 135（5.31〞） | 135（5.31〞） | 102（4.02〞） | 126（4.96〞） | 141（5.55〞） |
| F | — | — | 45（1.77〞） | 65（2.56〞） | 105（4.13〞） |
| G | 107（4.21〞） | 107（4.21〞） | 68（2.68〞） | 94（3.70〞） | 136（5.35〞） |
| H | 212（8.35〞） | 212（8.35〞） | 170（6.69〞） | 212（8.35〞） | 265（10.43〞） |
| I(P.C.D) | 172（6.77〞） | 172（6.77〞） | 115（4.53〞） | 172（6.77〞） | 172（6.77〞） |
| J | 3H-M10(Rear） | 3H-M10( Rear） | 3H-M8( Rear） | 3H-M10( Rear） | 3H-M10(Rear） |
| Working collet/Jaw |
C-44Collet C-44I Expanding parts |
C-44 Collet C-44I?Expanding parts |
C-25 Type Jaw |
40 Type Jaw |
C-70 Type Jaw |
| Power source | Air | hydraulic | Air | Air | Air |
|
Working Pressure |
2-20kg/cm2 (28-286psi) |
2-20kg/cm2 (28-286psi) |
2-9kg/cm2 (28-130psi) |
2-9kg/cm2 (28-130psi) |
2-9kg/cm2 (28-130psi) |
|
Max RPM |
1600 | 1600 | 1800 | 1600 | 1400 |
|
Max Clamping dia. Thru/no thru |
44mm （1.73〞） |
44mm （1.73〞） |
25mm/32mm （0.98〞/1.26〞） |
45mm/50mm （1.77〞/1.97〞） |
68mm/90mm （2.68〞/3.54〞） |
|
Piston Area |
117cm2(18in2) | 117cm2(18in2) | 115cm2(17.8in2) | 182cm2(28.2in2) | 329cm2(50.8in2) |
| Clamping Force | 5400kgf@16kg/cm2? (12020lbf@229psi) | 10800kgf@16kg/cm2? (24040lbf@229psi) | 2254kgf@7kg/cm2? (4958lbf@100psi) | 3567kgf@7kg/cm2? (7847lbf@100psi) | 6429kgf@7kg/cm2? (14143lbf@100psi) |
| ?N.W. | 17kgs(37.4lbs) | 17kgs(37.4lbs) | 7.5kgs(16.5lbs) | 15.0kgs(33.0lbs) | 22.5kgs(49.5lbs) |
Jaw Style Power Chuck-Hydraulic
| Model | JH5-25 | JH7-40 | JH7-70 | JH9-90 | JH9-120 |
|---|---|---|---|---|---|
| A | 135（5.31〞） | 192（7.56〞） | 192（7.56〞） | 230（9.06〞） | 229（9.02〞） |
| B | 100（3.94〞） | 155（6.10〞） | 155（6.10〞） | 190（7.48〞） | 190（7.48〞） |
| C | 25（0.98〞） | 45（1.77〞） | 68（2.68〞） | 88（3.52〞） | 118（4.65〞） |
| D | 4.0（0.16〞） | 4.5（0.18〞） | 5.0（0.20〞） | 5.5（0.22〞） | 5.5（0.22〞） |
| E | 102（4.02〞） | 126（4.96〞） | 141（5.55〞） | 150（5.91〞） | 157（6.18〞） |
| F | 45（1.77〞） | 65（2.56〞） | 105（4.13〞） | 105（4.13〞） | 140（5.51〞） |
| G | 68（2.68〞） | 94（3.70〞） | 136（5.35〞） | 136（5.35〞） | 168（6.61〞） |
| H | 138（5.43〞） | 190（7.48〞） | 211（8.31〞） | 232（9.13〞） | 275（10.83〞） |
| I(P.C.D) | 115（4.53〞） | 172（6.77〞） | 172（6.77〞） | 210（8.27〞） | 210（8.27〞） |
| J | 3H-M8(Rear） | 3H-M10( Rear） | 3H-M10(Rear） | 3H-M12(Rear） | 3H-M12( Rear） |
|
Working Jaw |
C-25 Type Jaw |
C-40 Type Jaw |
C-70 Type Jaw |
C-90 Type Jaw |
C-120 Type Jaw |
|
Power source |
Hydraulic | Hydraulic | Hydraulic | Hydraulic | Hydraulic |
|
Working Pressure |
10-25kg/cm2 (143-357psi) |
10-20kg/cm2 (143-286psi) |
10-20kg/cm2 (143-286psi) |
10-15kg/cm2 (143-214psi) |
10-15kg/cm2 (143-214psi) |
|
Max RPM |
1800 | 1600 | 1400 | 1100 | 900 |
|
Max Clamping dia. Thru/no thru |
25mm/32mm （0.98〞/1.26〞） | 45mm/50mm （1.77〞/1.97〞） | 68mm/90mm （2.68〞/3.54〞） | 88mm/88mm （3.52〞/3.52〞） | 118mm/118mm （4.65〞/4.65〞） |
|
Piston Area |
56cm2(8.68in2) | 85cm2(13.1in2) | 117cm2(18.1in2) | 133cm2(20.7in2) | 183cm2(28.4in2) |
|
Clamping Force |
2508kgf@16kg/cm2? (5519lbf@228psi) | 4032kgf@16kg/cm2? (8870lbf@228psi) | 5197kgf@16kg/cm2? (11433lbf@228psi) | 5913kgf@16kg/cm2? (13009lbf@228psi) | 6148kgf@12kg/cm2? (13528lbf@171psi) |
| ?N . W | 6.0kgs(13.2lbs) | 13.0kgs(28.6lbs) | 18.0kgs(39.6lbs) | 24.0kgs(52.8lbs) | 30.0kgs(66.0lbs) |
SPECIAL JAWS FOR HIGH SPEED ROTARY COLLET CHUCK/STATIONARY COLLET CHUCK
Special jaws Model and the matching chucks:
| Model | A | B | C | D | Mounted Screw |
Application collet chuck |
|---|---|---|---|---|---|---|
| C-25 | 45mm? (1.77〞） | 47.5mm??(1.87〞） | 7mm?(0.28〞） | 5.0mm?(0.20〞） | M5*10 | JA5-25/JH-25 |
| C-40 | 65mm? (2.56〞） | 67.5mm? (2.66〞） | 9mm? (0.35〞） | 6.0mm? (0.25〞） | M6*12 |
JA7-40/JH7-40 JAS-40/AHS-40/CAF-40 |
| C-70 | 105mm? (4.13〞） | 107.5mm? (4.23〞） | 9mm? (0.35〞） | 6.0mm? (0.24〞） | M6*12 |
JA7-70/JH7-70/JH9-90 JHS-70/CAF-70 |
| C-120 | 143mm? (5.51〞） | 143.5mm?(5.65〞） | 9mm? (0.35〞） | 6.0mm? (0.24〞） | M6*14 | JA9-120 |
Special Jaws type according to the workpieces:
44 TYPE EXPANDING AND CLAMPING DOUBLE FUNCTION ROTARY COLLET CHUCK
JA7-44/JH7-44 can work with C-44 collet to gripping O.D purpose; also can be switching to I.D clamping as a mandrel by install the expanding kits. The expanding kit including a push mandrel, a pin, and a C-44I expanding collet, which C-44I collet is make by order.
Subject to technology changes without prior information
?Non-standard requirements can be made
Next：PTG PRECISE EXPANDING MANDREL
Previous：3 JAW DIAPHRAGM POWER CHUCK
Exhibition：The 29th INT. Machine tools & Metalworking TECH. Exhibition 2025 Malaysia Date：From 14th to 17th May 2025 Venue: International Trade and Exhibition Centre,Kuala Lumpur,Malaysia Booth：L1-4309
Learn moreExhibition：Australian Manufacturing Week 2025 Date：From 06th to 09th May 2025 Venue: Melbourne Exhibition & Convention Centre,Melbourne, Victoria,Australia, 3205,Australia Booth：MT013
Learn moreExhibition: International Machine Tool Exhibition 2025 Sao Paulo,Brazil Date：From 06th to 10th May 2025 Venue: Centro de Exposies Imigrantes Rodovia dos Imigrantes, Km 1,5 So Paulo – SP,BRAZIL Booth：N049
Learn more
